YokelessMotor — Motor rating acceptance record
Worksheet revision: 2026-10-21 | Units: Nm, rpm, kW, A, V DC, degrees C, seconds
Guide: https://yokelessmotor.com/learn/axial-flux-motor-continuous-vs-peak-power
Planning worksheet, not a datasheet, test report or approved rating.

Programme / organisation:
Contact / work email:
Requested deliverable and quantities:
Configuration / drawing / winding / drive revision:
Evidence status for every supplied value: requested / simulated / measured

Complete one record for EACH sustained point or timed event:
- Shaft torque (Nm) and speed (rpm):
- Calculated mechanical power (kW), if useful:
- Continuous or timed requirement:
- Duration, repetition interval and event count:
- Starting winding / rotor / other limiting temperatures:
- Cooling fluid, inlet temperature, flow, ambient and mounting:
- Loaded DC bus and phase-current RMS / peak convention:
- Protective limits, derating and event stop conditions:
- Recovery condition before another event:
- Permitted temperatures and agreed sensor / hot-spot method:
- Stabilization criterion: change threshold AND observation window:
- Test channels, calibration, uncertainty and raw time-history deliverables:
- Acceptance owner / decision limits / exceptions:

Density comparison, if required:
- Included mass boundary: active parts / housed motor / complete drive:
- Included auxiliaries, electrical input and cooling equipment:

Missing information / proposed next experiment:
Need NDA before proprietary drawings? Yes / No / To discuss
An NDA request is not an executed agreement. Start with non-confidential information.
Send the completed brief to inquiry@yokelessmotor.com or use the Contact page.